Casual Articles - Dental Implants - Types

The most commonly used material used for implants is the inert metal titanium because it has been found to fuse well with live bone tissue in the jawbone. This fusion process is known as 'osseointegration'. The highly skilled work of inserting implants is carried out by a perodontist or oral surgeon who operates from within a hospital environment or more likely from a private clinic.

Root Form Implants

As the name suggests, root form implants resemble the root of a tooth but are formed like a self-tapping screw which gives it a good surface area for maximum fusion to the living bone. It is inserted by screwing the implant into a hole previously drilled into the jawbone or into the cavity left from an extraction. The implant then acts as a root or foundation for a new prosthetic crown. However, this type of implant can only be used if there is sufficient width and depth to the jawbone. Sometimes it is necessary to graft additional bone to the jawbone before dental implants can be considered.

Plate Form Implants

If there is insufficient live bone structure because the jawbone is too narrow or not deep enough then plate form implants is another option the perodontist will consider. This takes the form of a long narrow strip of titanium which is inserted between the jawbone and the gum and will fuse with the jawbone giving a foundation for a number of new prosthetic crowns if required. Sometimes it may also be necessary to graft additional bone if the jawbone is in a poor condition before the implant can be inserted.

Subperiosteal Implants

Subperiosteal implants are an option used where the condition of the jawbone is such that an insert is not possible and a bone graft is not feasible. The jawbone is exposed and a mould impression taken from which the subperiosteal implant is created and placed on top of the jawbone under the gum and fusion takes place between the jawbone and the subperiosteal implant. Sometimes a CAT scan is taken of the patient’s jaw which then allows the subperiosteal implant to be made without first exposing the jawbone which would otherwise require a two stage surgical operation.

Root Form Implants

As the name suggests, root form implants resemble the root of a tooth but are formed like a self-tapping screw which gives it a good surface area for maximum fusion to the living bone. It is inserted by screwing the implant into a hole previously drilled into the jawbone or into the cavity left from an extraction. The implant then acts as a root or foundation for a new prosthetic crown. However, this type of implant can only be used if there is sufficient width and depth to the jawbone. Sometimes it is necessary to graft additional bone to the jawbone before dental implants can be considered.

Plate Form Implants

If there is insufficient live bone structure because the jawbone is too narrow or not deep enough then plate form implants is another option the perodontist will consider. This takes the form of a long narrow strip of titanium which is inserted between the jawbone and the gum and will fuse with the jawbone giving a foundation for a number of new prosthetic crowns if required. Sometimes it may also be necessary to graft additional bone if the jawbone is in a poor condition before the implant can be inserted.

Subperiosteal Implants

Subperiosteal implants are an option used where the condition of the jawbone is such that an insert is not possible and a bone graft is not feasible. The jawbone is exposed and a mould impression taken from which the subperiosteal implant is created and placed on top of the jawbone under the gum and fusion takes place between the jawbone and the subperiosteal implant. Sometimes a CAT scan is taken of the patient’s jaw which then allows the subperiosteal implant to be made without first exposing the jawbone which would otherwise require a two stage surgical operation.

Are You Generating Enough Home Business Website Traffic?
There is no secret behind the message, the more home business website traffic you generate the higher your income is going to be. In order to make sales you have to have people to pitch your ideas and products to. While it is difficult to generate a high traffic volume right out of the gate, there are things you can do to help increase your home business website traffic.The first thing you can do to ensure that peoppreviously drilled into the jawbone or into the cavity left from an extraction. The implant then acts as a root or foundation for a new prosthetic crown. However, this type of implant can only be used if there is sufficient width and depth to the jawbone. Sometimes it is necessary to graft additional bone to the jawbone before dental implants can be considered.

Plate Form Implants

If there is insufficient live bone structure because the jawbone is too narrow or not deep enough then plate form implants is another option the perodontist will consider. This takes the form of a long narrow strip of titanium which is inserted between the jawbone and the gum and will fuse with the jawbone giving a foundation for a number of new prosthetic crowns if required. Sometimes it may also be necessary to graft additional bone if the jawbone is in a poor condition before the implant can be inserted.

Subperiosteal Implants

Subperiosteal implants are an option used where the condition of the jawbone is such that an insert is not possible and a bone graft is not feasible. The jawbone is exposed and a mould impression taken from which the subperiosteal implant is created and placed on top of the jawbone under the gum and fusion takes place between the jawbone and the subperiosteal implant. Sometimes a CAT scan is taken of the patient’s jaw which then allows the subperiosteal implant to be made without first exposing the jawbone which would otherwise require a two stage surgical operation.

Money Should Always Flow Toward the Author
* Will this be Published by Debit or Deposit? A new writer asks the question;I have submitted a book for publishing and they said that I need to pay them for a critique. Is this a gimmik. Please help.If they are a reputable publishing company you shouldn't have to pay anything, especially when they haven't even accepted your book. I would be very wary of them. How badly do you want to seform implants is another option the perodontist will consider. This takes the form of a long narrow strip of titanium which is inserted between the jawbone and the gum and will fuse with the jawbone giving a foundation for a number of new prosthetic crowns if required. Sometimes it may also be necessary to graft additional bone if the jawbone is in a poor condition before the implant can be inserted.

Subperiosteal Implants

Subperiosteal implants are an option used where the condition of the jawbone is such that an insert is not possible and a bone graft is not feasible. The jawbone is exposed and a mould impression taken from which the subperiosteal implant is created and placed on top of the jawbone under the gum and fusion takes place between the jawbone and the subperiosteal implant. Sometimes a CAT scan is taken of the patient’s jaw which then allows the subperiosteal implant to be made without first exposing the jawbone which would otherwise require a two stage surgical operation.

What's In Your Resource Box (SIG File)?
One of the most important things you can do to improve your visibility and connect with customers or clients is to create a strong personal branding statement in your resource box. I'm not talking about adding your job title. I'm talking about including what it is you really do.* What is the most important benefit you provide to your customers and your company?* What can you do better than anyone ele jawbone is such that an insert is not possible and a bone graft is not feasible. The jawbone is exposed and a mould impression taken from which the subperiosteal implant is created and placed on top of the jawbone under the gum and fusion takes place between the jawbone and the subperiosteal implant. Sometimes a CAT scan is taken of the patient’s jaw which then allows the subperiosteal implant to be made without first exposing the jawbone which would otherwise require a two stage surgical operation.

Artificial Bone Substitute

This is a synthetic material which has similar properties to natural bone and will cling to the live jawbone and grow like real bone. This type of implant is usually used as a foundation for dentures.

Endosteal Implants

Endosteal implants are similar to subperiosteal in that they are moulded or shaped to fit in a cavity in the jaw rather than sit on top of the jaw.

This article is intended only to give a very basic outline of the types of dental implants considered by the perodontist or oral surgeon. Sometimes a variation or combination of the types described may be used but it is important that if you are considering this type of dental treatment that you consult your dentist or a perodotist to establish what is the most suitable type of treatment for your unique situation.

HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.casualarticles.com/article/238525/casualarticles-Dental-Implants--Types.html">Dental Implants - Types</a>

BB link (for phorums):
[url=http://www.casualarticles.com/article/238525/casualarticles-Dental-Implants--Types.html]Dental Implants - Types[/url]

Related Articles:

How Payday Loans Measure Up To Other Financial Tools.

Most peoples opinion about online payday loans may not actually be based on the facts. Did you know that payday loans sometimes make sense over other financial tools? In this article I explain why payday loans can be beneficial.

Should I Float Or Lock

First, what does this mean you might ask? When considering buying or refinancing a home, consumers have the ability to lock their interest rate so that it will not change between today and the time the loan closes. Floating means a borrower will wait to see if interest rates will fall in hopes that they can get a lower interest rate when the loan closes. Both have some risk associated with them, so I'd like to help educate you on what to consider when making this important decision.

Zero Energy Homes, Made Affordable

Zero net source energy homes can be built for the Affordable Housing Market. Habitat for Humanity collaborated with National Renewable Energy Laboratories (NREL) to design a zero energy home for a low income family, using off-the-shelf, readily available technologies. They incorporated energy-efficiency strategies that didn't require the home owners to be experts in sustainable building operations or conduct any maintenance beyond that required of a 'normal' home. The result is an affordable market home that is net energy producer.

Bookmark it: