Tags |
|
|
Links |
|
|
Casual Articles - How to Install a Motherboard
Your domain hosting name is not something to be chosen lightly. Your domain hosting name is your front line in your branding campaign for your online business (or your offline business’s online presence). Careful consideration needs to go into choosing just the right domain hosting name to represent your business. The following are some key points to consider:The Right Extension for the Right Site Each type of site you want domain hosting for may serve a different market. Make sure the extension you use -- .com, .net, .org, .biz, etc. -- is the right extension for your market. If you are a business and there is no reason you cannot do it, get
The next step in knowing how to install a motherboard involves alignment. You want holes from the case to match the holes from the motherboard--however there’s more to it than that. First, locate the mounting holes in the case or tray that will match up with those of the motherboard.
Now that you’ve found the holes, it’s time to install the standoffs. Standoffs are basically brass or plastic pegs that will support the motherboard as it installed. These pegs or spacers come in different varieties; some will be brass while others will b
There are a lot of terms associated with the credit world. With such daunting vocabulary as variable APR or secured card, sometimes people can get confused about just what a feature of a credit card means.First, we’ll discuss what a secured credit card is. A secured card is a card that is guaranteed. When you apply for one of these cards, you guarantee a deposit of cash or otherwise collateral so the bank can be sure that you will pay them back. This is a must when establishing credit or trying to rebuild a shattered credit rating. So, on the opposite end, unsecured credit cards are cards that you get without any guarantee to the bank that you will pay the
You will notice that the motherboard comes pre-configured with numerous slots where you can plug devices in. Additionally, there are connectors and jumpers that you will need to set to make it work properly.
Be sure to have your documentation handy at all times. For the purposes of this tutorial we will be working with the standard ATX motherboard common to most mid-tower computers.
1. Open the Case and Remove Motherboard Tray
The first step will be to open the case. The method for doing this will vary depending upon the case you have. For mid-towers, you will most likely have to remove a side panel that sits above where the motherboard will be.
Unscrew the two screws holding this panel onto your computer and slide it out. Set the screws in a safe place. If you have an older style case you may have to remove all of the screws from the back of the chassis, and slide that out.
If your case has a motherboard tray you will need to remove that as well. Some cases have removable motherboard trays meant to help you better install motherboard units correctly. These trays are quite useful and can make installing your motherboard much easier. If your case has such a tray, be sure to remove it as well.
2. Replace the ATX Connector Plate and Align Motherboard with Case
If you check all the parts that came bundled with your motherboard, you will notice that it came with its own face plate. This might seem unusual, as your computer case will have an ATX face plate already installed. The problem here has to do with potential incompatibility. Your ATX face place may have connectors arranged in a different pattern than the one that came with your case.
Therefore, it’s best to use the custom face plate that came with your motherboard. To swap out the computer case face plate, press both corners until it pops out. Snap the new plate in place, aligning the keyboard and mouse connectors to the side of the case where your power supply is installed.
3. Install Standoffs and Secure the Motherboard
The next step in knowing how to install a motherboard involves alignment. You want holes from the case to match the holes from the motherboard--however there’s more to it than that. First, locate the mounting holes in the case or tray that will match up with those of the motherboard.
Now that you’ve found the holes, it’s time to install the standoffs. Standoffs are basically brass or plastic pegs that will support the motherboard as it installed. These pegs or spacers come in different varieties; some will be brass while others will be
In many housing markets across the country, the increase in home prices does not match the average household income. Hence, many people are unable to save money for a down payment. Ideally, mortgage companies prefer applicants to have a down payment of at least 5%, in addition to paying closing costs. Unfortunately, this is an unrealistic expectation. Thus, many homebuyers are taking advantage of zero down mortgage loans.How Do Zero Down Loans Works?Fortunately, many mortgage companies recognize how difficult it is to save for a down payment. Thus, some lenders have created special loan programs that make it possible to buy a ho
1. Open the Case and Remove Motherboard Tray
The first step will be to open the case. The method for doing this will vary depending upon the case you have. For mid-towers, you will most likely have to remove a side panel that sits above where the motherboard will be.
Unscrew the two screws holding this panel onto your computer and slide it out. Set the screws in a safe place. If you have an older style case you may have to remove all of the screws from the back of the chassis, and slide that out.
If your case has a motherboard tray you will need to remove that as well. Some cases have removable motherboard trays meant to help you better install motherboard units correctly. These trays are quite useful and can make installing your motherboard much easier. If your case has such a tray, be sure to remove it as well.
2. Replace the ATX Connector Plate and Align Motherboard with Case
If you check all the parts that came bundled with your motherboard, you will notice that it came with its own face plate. This might seem unusual, as your computer case will have an ATX face plate already installed. The problem here has to do with potential incompatibility. Your ATX face place may have connectors arranged in a different pattern than the one that came with your case.
Therefore, it’s best to use the custom face plate that came with your motherboard. To swap out the computer case face plate, press both corners until it pops out. Snap the new plate in place, aligning the keyboard and mouse connectors to the side of the case where your power supply is installed.
3. Install Standoffs and Secure the Motherboard
The next step in knowing how to install a motherboard involves alignment. You want holes from the case to match the holes from the motherboard--however there’s more to it than that. First, locate the mounting holes in the case or tray that will match up with those of the motherboard.
Now that you’ve found the holes, it’s time to install the standoffs. Standoffs are basically brass or plastic pegs that will support the motherboard as it installed. These pegs or spacers come in different varieties; some will be brass while others will b
Do you want to own a peace of the American Dream, do you suppose a small business of your own, where you are the boss would fulfill that need? Are you tired of being told what to do at work? Do you feel unappreciated? Do you think it is time that you took some risk and went for it in your own business? Can you afford to make the sacrifice to do this? After all if you have a mortgage, family and obligations you may not be able to take the risk right now.If you are thinking of starting your own business you need to put together a business plan and be honest with yourself. In doing so you need to cost out the capitalization needed from investors, personal sav
2. Replace the ATX Connector Plate and Align Motherboard with Case
If you check all the parts that came bundled with your motherboard, you will notice that it came with its own face plate. This might seem unusual, as your computer case will have an ATX face plate already installed. The problem here has to do with potential incompatibility. Your ATX face place may have connectors arranged in a different pattern than the one that came with your case.
Therefore, it’s best to use the custom face plate that came with your motherboard. To swap out the computer case face plate, press both corners until it pops out. Snap the new plate in place, aligning the keyboard and mouse connectors to the side of the case where your power supply is installed.
3. Install Standoffs and Secure the Motherboard
The next step in knowing how to install a motherboard involves alignment. You want holes from the case to match the holes from the motherboard--however there’s more to it than that. First, locate the mounting holes in the case or tray that will match up with those of the motherboard.
Now that you’ve found the holes, it’s time to install the standoffs. Standoffs are basically brass or plastic pegs that will support the motherboard as it installed. These pegs or spacers come in different varieties; some will be brass while others will b
Bargain IT, the specialist UK Cisco resellers, have recognized a difficult problem which sometimes faces IT managers, especially in larger companies. When installing a complete system, where is the best place to start?The professionals there know that a systems approach begins with a single, resilient platform such as the Cisco integrated services routers. A systems approach combines packaging with intelligent services within and between services, and weaves voice, security, routing, and application services together, so that processes become more automated and more intelligent. The results are pervasive security in the network and applications; higher QoS
Therefore, it’s best to use the custom face plate that came with your motherboard. To swap out the computer case face plate, press both corners until it pops out. Snap the new plate in place, aligning the keyboard and mouse connectors to the side of the case where your power supply is installed.
3. Install Standoffs and Secure the Motherboard
The next step in knowing how to install a motherboard involves alignment. You want holes from the case to match the holes from the motherboard--however there’s more to it than that. First, locate the mounting holes in the case or tray that will match up with those of the motherboard.
Now that you’ve found the holes, it’s time to install the standoffs. Standoffs are basically brass or plastic pegs that will support the motherboard as it installed. These pegs or spacers come in different varieties; some will be brass while others will b
You have developed the website for your business. The content in your website is optimized with keywords. You offer a product and/or a service that people need and want. All of your information is included for people to easily contact you. The website is fresh and informative. Now, you are ready to begin marketing your website so that you can gain exposure. There are many facts that you should know regarding website traffic prior to beginning the process of marketing.The first fact that every website owner should be aware of is that businesses that have a lot of website traffic attain most of it through search engines. It is very important that you allow y
The next step in knowing how to install a motherboard involves alignment. You want holes from the case to match the holes from the motherboard--however there’s more to it than that. First, locate the mounting holes in the case or tray that will match up with those of the motherboard.
Now that you’ve found the holes, it’s time to install the standoffs. Standoffs are basically brass or plastic pegs that will support the motherboard as it installed. These pegs or spacers come in different varieties; some will be brass while others will be plastic. Check which ones you have. If the standoffs are of the brass variety, you may need a hex tool of some sort in order to properly install them. Install the standoffs into the holes that you identified earlier.
With the standoffs securely installed, it’s time to secure the motherboard. Align the motherboard over your case or tray so that you can see the standoffs clearly through their matching holes on the motherboard. Then begin from the center of the motherboard to screw the motherboard to your tray or case.
After you complete that, continue clockwise, affixing the screws into the mounting holes in all of the corners of the board. As you can see, knowing how to properly install motherboard units to your PC involves more than just a few turns of the screws!
4. Installing Critical Wires and Connectors
The next step in knowing how to install computer components like your motherboard is to install critical wires and connects. Just because your motherboard is physically installed doesn’t mean it can communicate with the rest of your system.
You’ll have to connect some important wires and cables to complete the process. The first wires are the ones that hang loose from your case, like hard drive, power, reset and speaker leads. Consult your documentation to know how to plug these wires into their appropriate slots in the case.
The next cable is the one that feeds juice to your motherboard, the 20 pin ATX power lead from your power supply. Plug that in the appropriate slot in the motherboard. Some newer computers like the Pentium 4 may also include an additional 4 pin 12v connector from the power supply, which you must plug into the motherboard as well. Check that all of the critical wires are secured. If you used a removable tray you can reinsert that into the case at this time.
Conclusion
You have learned how to install a motherboard, the basic core of your computer system. As you can see, it’s not a hard process—certainly not brain surgery—but it’s important that you follow the steps in order.
Also, consult your documentation first before you begin the process. It will let you know if there are any jumpers that you need to set before attempting your install. These sett
HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.casualarticles.com/article/174870/casualarticles-How-to-Install-a-Motherboard.html">How to Install a Motherboard</a>
BB link (for phorums):
[url=http://www.casualarticles.com/article/174870/casualarticles-How-to-Install-a-Motherboard.html]How to Install a Motherboard[/url]
Related Articles:
Can a Guru Match Wits with the Mighty Yahoo! Search Marketing Machine?
Forex Trading Can Be Like Day-trading
Bookmark it:
|