Tags |
|
|
Links |
|
|
Casual Articles - Choosing The Right PAT Testing and Tagging Equipment
In this some strategies you can implement in your business.ArticlesFor those who have read my work, you know that articles not only brand you as an expert but are also a way to create quality content for your site, and search engines love content.If you don't like writing, or don't write, you can find quality articles to post on your site. The larger your site, the more likely you will be found in the search engines. Here are a few article di
PASS/FAIL testers have the advantage of being easy to use but can have a limited practical use. Manual Recording PAT Testers Manual PAT testers give much more functionality than the simple PASS/FAIL testers. As well as the PASS/FAIL these tester will all so give numeric results. These testers have standard Insulation and Earth Continuity tests, and most also carry out an Earth Leakage.
Downloadable PAT Testers
For testing large amounts of equipment a testers that automates the process and has recording capabilities is more suitable. These testers are able to initiate a
Feel like a lemming lately? Ready to follow the crowd into the great plunge of Ultimate American Consumerism? Just in case you need a little help, here is a tongue-in-cheek look at how to continue the process of becoming the Ultimate American Consumer!1. Always spend right at the level of your after-tax earnings. Having surplus dollars is troublesome. It’s difficult to know exactly what to do with them.2. Forget having 3, 6, or even 12 months of basi
The tests that are required to meet AS/NZ 3760: 2003 are as follows
· Polarity
· Insulation Resistance
· Earth Resistance
· Current Leakage
The AS/NZ 3760 states that the earth resistance of the appliance can be tested either:
1. With a current between 100-200mA this is called a earth continuity
2. With a current of 10A this is called a routine test or,
3. With a current of 25A this is called a earth bond test
Each of these three tests has their advantages
Earth Continuity
A low current test is ideals for pieces of equipment with functional or signal earths. This is a circuit that has the earth that is connected through the circuit board. These pieces of equipment are not very common but can be found on scientific equipment and high end audio equipment (can be found at film, TV and sound studios). The users of this equipment normal know that it is earthed this way.
A disadvantage of an earth continuity test is that it will still pass with only one strand of wire connected in the earth. This is not sufficient for carrying large fault current. And if someone was to touch external metal during such fault the person is likely to be electrocuted.
Routine Test
There is little advantage to a routine test. But often testers that only use this test will be smaller and lighter that a 25A test due to the small transformer. Earth Bond Test
High current tests are good to make sure that there is a good connection in the earthing conductor. If there is any less that five strands connected in the earth the test will fail. The disadvantage is with high current tests if the conductor is lightly corroded the appliance will still pass For simplicity we can place the test and tag equipment in one of three distinct categories. The following is a guide to the different types, and highlights features to look for.
Simple PASS/FAIL types
PASS/FAIL type testers give a simple pass or fail test result allowing no interpretation of the test data. Some of the tester on the market will only carry out insulation and earth continuity tests or has an additional accessory to perform a leakage test and as a result will not be able to test appliances with Surge protectors (this is because AS/NZ 3760 states that a insulation resistance test or earth leakage test must be performed. Appliances with surge protectors will fail an insulation resistance test as a result the only way to test these appliances is to perform a leaking test). If the tester can not carry out the leakage test than only appliances with no electronic switching can be tested.
PASS/FAIL testers have the advantage of being easy to use but can have a limited practical use. Manual Recording PAT Testers Manual PAT testers give much more functionality than the simple PASS/FAIL testers. As well as the PASS/FAIL these tester will all so give numeric results. These testers have standard Insulation and Earth Continuity tests, and most also carry out an Earth Leakage.
Downloadable PAT Testers
For testing large amounts of equipment a testers that automates the process and has recording capabilities is more suitable. These testers are able to initiate a
A majority of home owners today got their houses through mortgage finance or loan. In the last decade, the changes in home mortgage finances and loans have brought many promising benefits to homebuyers. However, these changes in mortgage finance have also cost some important tradeoffs.The most important benefit that a homebuyer got from this change in mortgage finance is the fact that they are now offered more choices. This allows them to do a more effectiv
Each of these three tests has their advantages
Earth Continuity
A low current test is ideals for pieces of equipment with functional or signal earths. This is a circuit that has the earth that is connected through the circuit board. These pieces of equipment are not very common but can be found on scientific equipment and high end audio equipment (can be found at film, TV and sound studios). The users of this equipment normal know that it is earthed this way.
A disadvantage of an earth continuity test is that it will still pass with only one strand of wire connected in the earth. This is not sufficient for carrying large fault current. And if someone was to touch external metal during such fault the person is likely to be electrocuted.
Routine Test
There is little advantage to a routine test. But often testers that only use this test will be smaller and lighter that a 25A test due to the small transformer. Earth Bond Test
High current tests are good to make sure that there is a good connection in the earthing conductor. If there is any less that five strands connected in the earth the test will fail. The disadvantage is with high current tests if the conductor is lightly corroded the appliance will still pass For simplicity we can place the test and tag equipment in one of three distinct categories. The following is a guide to the different types, and highlights features to look for.
Simple PASS/FAIL types
PASS/FAIL type testers give a simple pass or fail test result allowing no interpretation of the test data. Some of the tester on the market will only carry out insulation and earth continuity tests or has an additional accessory to perform a leakage test and as a result will not be able to test appliances with Surge protectors (this is because AS/NZ 3760 states that a insulation resistance test or earth leakage test must be performed. Appliances with surge protectors will fail an insulation resistance test as a result the only way to test these appliances is to perform a leaking test). If the tester can not carry out the leakage test than only appliances with no electronic switching can be tested.
PASS/FAIL testers have the advantage of being easy to use but can have a limited practical use. Manual Recording PAT Testers Manual PAT testers give much more functionality than the simple PASS/FAIL testers. As well as the PASS/FAIL these tester will all so give numeric results. These testers have standard Insulation and Earth Continuity tests, and most also carry out an Earth Leakage.
Downloadable PAT Testers
For testing large amounts of equipment a testers that automates the process and has recording capabilities is more suitable. These testers are able to initiate a
At tax time many years ago, I faced reporting a series of securities transactions on my federal and state tax returns. Before I came in for my appointment with my CPA, she asked me to detail each of the (as it turned out to be) too-many stock transactions: Date bought and sold, basis, name of security, etc.Later, when I picked up my return and I saw my accountant's bill -- guess what? She billed me for each item as if she had independently gone through my p
Routine Test
There is little advantage to a routine test. But often testers that only use this test will be smaller and lighter that a 25A test due to the small transformer. Earth Bond Test
High current tests are good to make sure that there is a good connection in the earthing conductor. If there is any less that five strands connected in the earth the test will fail. The disadvantage is with high current tests if the conductor is lightly corroded the appliance will still pass For simplicity we can place the test and tag equipment in one of three distinct categories. The following is a guide to the different types, and highlights features to look for.
Simple PASS/FAIL types
PASS/FAIL type testers give a simple pass or fail test result allowing no interpretation of the test data. Some of the tester on the market will only carry out insulation and earth continuity tests or has an additional accessory to perform a leakage test and as a result will not be able to test appliances with Surge protectors (this is because AS/NZ 3760 states that a insulation resistance test or earth leakage test must be performed. Appliances with surge protectors will fail an insulation resistance test as a result the only way to test these appliances is to perform a leaking test). If the tester can not carry out the leakage test than only appliances with no electronic switching can be tested.
PASS/FAIL testers have the advantage of being easy to use but can have a limited practical use. Manual Recording PAT Testers Manual PAT testers give much more functionality than the simple PASS/FAIL testers. As well as the PASS/FAIL these tester will all so give numeric results. These testers have standard Insulation and Earth Continuity tests, and most also carry out an Earth Leakage.
Downloadable PAT Testers
For testing large amounts of equipment a testers that automates the process and has recording capabilities is more suitable. These testers are able to initiate a
Collision Auto Insurance Collision auto insurance covers your vehicle for damages that may result from an accident. Consider a situation in which you were exiting your driveway. Although you looked both ways, you failed to see the oncoming 2005 BMW M3. You hit that car causing damage to that vehicle and yours. Who will pay to fixed your car? Suing the other driver is not an option since the accident was your fault. Without collision coverage you would
Simple PASS/FAIL types
PASS/FAIL type testers give a simple pass or fail test result allowing no interpretation of the test data. Some of the tester on the market will only carry out insulation and earth continuity tests or has an additional accessory to perform a leakage test and as a result will not be able to test appliances with Surge protectors (this is because AS/NZ 3760 states that a insulation resistance test or earth leakage test must be performed. Appliances with surge protectors will fail an insulation resistance test as a result the only way to test these appliances is to perform a leaking test). If the tester can not carry out the leakage test than only appliances with no electronic switching can be tested.
PASS/FAIL testers have the advantage of being easy to use but can have a limited practical use. Manual Recording PAT Testers Manual PAT testers give much more functionality than the simple PASS/FAIL testers. As well as the PASS/FAIL these tester will all so give numeric results. These testers have standard Insulation and Earth Continuity tests, and most also carry out an Earth Leakage.
Downloadable PAT Testers
For testing large amounts of equipment a testers that automates the process and has recording capabilities is more suitable. These testers are able to initiate a
It’s a startling fact: almost all entrepreneurs aren’t marketing their businesses effectively. Marketing goes much deeper than advertising. It begins with having the proper mindset. These five ideas will send you on the right path to building a solid marketing foundation for your business.1. Start with yourselfAsk yourself this: are you passionate about the product you’re selling? If you’re not, you have a long way to go before you can
PASS/FAIL testers have the advantage of being easy to use but can have a limited practical use. Manual Recording PAT Testers Manual PAT testers give much more functionality than the simple PASS/FAIL testers. As well as the PASS/FAIL these tester will all so give numeric results. These testers have standard Insulation and Earth Continuity tests, and most also carry out an Earth Leakage.
Downloadable PAT Testers
For testing large amounts of equipment a testers that automates the process and has recording capabilities is more suitable. These testers are able to initiate a pre-programmed test sequence via a shortcut menu. Test data, including the overall PASS or FAIL result, is stored for downloading and most of can be connected to a test and tag printer to print test labels. These testers often have a bewildering amount of features.
HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.casualarticles.com/article/169631/casualarticles-Choosing-The-Right-PAT-Testing-and-Tagging-Equipment.html">Choosing The Right PAT Testing and Tagging Equipment</a>
BB link (for phorums):
[url=http://www.casualarticles.com/article/169631/casualarticles-Choosing-The-Right-PAT-Testing-and-Tagging-Equipment.html]Choosing The Right PAT Testing and Tagging Equipment[/url]
Related Articles:
How a Single Paragraph Boosted My Adsense Profits
So What's The Lightest Notebook Computer Anyway
Bookmark it:
|